FallTech 7015B Contractor Plus 1D Standard Non-Belted Mating Buckle Harness
FallTech 7015B Contractor Plus 1D Standard Non-Belted Mating Buckle Harness
CSA Z259.10-2018 Class AThe FallTech 7015B Contractor Plus is the mating-buckle economy 1D harness — fully CSA Z259.10 Class A certified with FallTech's integrated dorsal SRL sleeve, padded air-mesh shoulder yoke, and structured waist pad. Mating buckles on both chest and legs offer faster don/doff than tongue buckles at a lower cost than Visi-Lock quick-connect. The right choice for crews that need budget-friendly compliance with moderate speed.
Overview
The 7015B is the 7016 Contractor Plus with mating-buckle chest and legs instead of tongue-buckle legs and mating-buckle chest. The fully mating-buckle configuration is slightly faster to don than the 7016 and eliminates the "two different buckle types" learning curve some crews have with mixed-buckle harnesses. Steel hardware, low-profile torso adjusters, and the same integrated dorsal SRL sleeve. CSA Z259.10-2018 Class A and ANSI Z359.11-2014 certified. Sizes XS through 3X cover the full crew range.
Key Features
Mating Buckle Chest + Legs
Consistent mating-buckle closure on all three straps. Thread-through-and-ratchet mechanism is faster than tongue buckles and simpler than QC.
Padded Air-Mesh Shoulder Yoke
Ventilated shoulder padding breathes well in warm conditions — a legitimate comfort advantage in summer construction.
Structured Waist Support Pad
Reinforced waist pad supports the lower back during active work and gives a stable mounting surface for a tool belt.
Integrated Dorsal SRL Sleeve
Built-in routing sleeve for personal SRL attachment at the dorsal D-ring.
Low-Profile Torso Adjusters
Slim torso strap profile works comfortably under jackets or work vests.
Steel Hardware
Durable plated alloy steel dorsal D-ring and torso rollers — proven, cost-effective.
Technical Specifications
| CSA Certification | CSA Z259.10-2018 Class A |
| ANSI Certification | ANSI Z359.11-2014 |
| D-Ring Configuration | 1D — Single dorsal, plated alloy steel |
| Type | Standard Non-Belted |
| Chest Buckle | Mating Buckle |
| Leg Buckles | Mating Buckle |
| Torso Adjusters | Steel Spring-Tension Roller (low-profile) |
| Shoulder Padding | Padded air-mesh yoke |
| Webbing | Polyester; 5,000 lb min. static strength |
| Available Sizes | XS, S/M, L/X, 2X, 3X |
| SRL Attachment | Integrated dorsal SRL sleeve |
| Applications | Fall Arrest |
CSA Certification Details
CSA Z259.10-2018 Class A — Fall Arrest
Class A certification for dorsal fall arrest. Meets all Canadian provincial OHS requirements for 1D fall arrest harnesses.
Applications
- General construction and renovation
- Residential and commercial roofing
- Facility maintenance
- Occasional-use fall arrest (HVAC, window washing, signage)
- Budget-conscious crews needing CSA-compliant harnesses
How to Choose the Right Harness
The 7015B is the mating-buckle economy 1D non-belted harness. For tongue-buckle legs, the FallTech 7016 Contractor is the same platform with a slightly different buckle mix. For mid-tier comfort with tri-layer padding, step up to the FallTech 7006B or 7008B Tradesman Plus. For the 3D belted version of the Contractor Plus, look at the FallTech 7073B.
Compliance & Standards
Primary: CSA Z259.10-2018 Class A
Also Certified: ANSI Z359.11-2014
Provincial Coverage: Meets all Canadian provincial and territorial OHS requirements.
Frequently Asked Questions
Shipping & Availability
The FallTech 7015B ships from Canada to all provinces and territories. Contact Fall Protection Canada for crew pricing.