FallTech 7021FD Journeyman Flex Climbing Harness with Sternal D-Ring
FallTech 7021FD Journeyman Flex Climbing Harness with Sternal D-Ring
CSA Z259.10-2018 Class A, LThe FallTech 7021FD Journeyman Flex adds a sternal (chest-front) D-ring to the base 7021 platform for ladder-climbing and cable fall arrester systems. When your access route requires a ladder-safety cable (e.g., fixed vertical ladders on telecom towers, wind turbines, water towers, or industrial stacks), the sternal D-ring is the proper connection point. CSA Z259.10-2018 Class A, L certified.
Overview
The 7021FD is the 7021 with an added sternal D-ring positioned at the chest. The sternal attachment is used with vertical cable fall arresters (ladder safety systems) or for front-of-body SRL connection during certain climbing scenarios. The dorsal D-ring remains the primary fall arrest attachment for general work at height; the sternal D-ring activates only when climbing fixed ladders or using a front-mounted trailing fall arrester. Steel hardware, mating-buckle chest, tongue-buckle legs. CSA Z259.10-2018 Class A, L and ANSI Z359.11-2014 certified.
Key Features
Sternal D-Ring (Class L)
Front-of-chest D-ring rated for ladder-climbing attachment with cable or rope fall arresters. Activates the proper fall arrest geometry when climbing vertically.
Dorsal D-Ring (Class A)
Standard rear dorsal D-ring for general fall arrest from overhead tie-off. The 7021FD does not compromise dorsal fall arrest capability.
Integrated Dorsal SRL Sleeve
Built-in routing sleeve for personal SRL attachment at the dorsal D-ring.
Steel Hardware Throughout
Steel D-rings and steel spring-tension torso rollers. Durable, proven, cost-effective.
Mating Buckle Chest + Tongue Leg Buckles
Traditional tongue-buckle style for a dialled-in fit through the full size range.
Ergonomic Padding
Shoulder yoke and leg pads contoured for reduced pressure during climbing and active work.
Technical Specifications
| CSA Certification | CSA Z259.10-2018 Class A, L (Fall Arrest + Ladder Climbing) |
| ANSI Certification | ANSI Z359.11-2014 |
| D-Ring Configuration | Dorsal + sternal (front chest), plated alloy steel |
| Type | Standard Non-Belted |
| Chest Buckle | Mating Buckle |
| Leg Buckles | Tongue Buckle |
| Torso Adjusters | Steel Spring-Tension Roller |
| Webbing | Polyester; 5,000 lb min. static strength |
| Available Sizes | S, M, L, XL |
| SRL Attachment | Integrated dorsal SRL sleeve |
| Applications | Fall Arrest + Climbing |
CSA Certification Details
CSA Z259.10-2018 Class A, L — Fall Arrest + Ladder Climbing
Class A for dorsal fall arrest from overhead tie-off. Class L for sternal attachment during ladder climbing with a cable or rope fall arrester. The sternal D-ring is only rated for climbing — never use it for general fall arrest from an overhead anchor. Meets all Canadian provincial OHS requirements for climbing-capable harnesses.
Applications
- Fixed vertical ladders with cable safety systems
- Water tower and stack access
- Communication and telecom tower entry ladders
- Wind turbine ladder climbs
- Industrial silo and bin ladders
- Any application requiring sternal-mounted trailing fall arrester
How to Choose the Right Harness
The 7021FD is for workers who climb fixed ladders with cable or rope fall-arrester systems. For general fall arrest without climbing, the FallTech 7021 is the same harness without the sternal D-ring at a lower price. For quick-connect buckles on a climbing harness, the FallTech 7021QCFD is the QC version. For full three-D-ring climbing (Cross-Over) on tower work, look at the FallTech 7028 Cross-Over.
Compliance & Standards
Primary: CSA Z259.10-2018 Class A, L
Also Certified: ANSI Z359.11-2014
Provincial Coverage: Meets all Canadian provincial and territorial OHS requirements for climbing-capable harnesses.
Frequently Asked Questions
Shipping & Availability
The FallTech 7021FD ships from Canada to all provinces and territories. Contact Fall Protection Canada for climb system pricing.