Frontline CSQ184 Steel Quarter-Turn Locking Carabiner | 9,000 lb
Frontline CSQ184 Steel Quarter-Turn Locking Carabiner | 9,000 lb. A high-strength alloy steel carabiner with a quarter-turn locking gate, built to take the toughest working conditions as the connection point between an SRL or lanyard and a suitable anchor. The gate opens about 0.84 in and includes a safety pin for extra SRL stability, and every carabiner is proof tested.
Frontline CSQ184 locking carabiner key features
- High-strength alloy steel body
- Quarter-turn locking gate, approximately 0.84 in opening
- Safety pin included for enhanced SRL stability
- Galvanized with golden-yellow passivation finish
- Proof tested for quality assurance against the required forces and standards
- Serves as the connection point to an SRL or a suitable anchor
Frontline CSQ184 steel quarter-turn carabiner specifications
| Manufacturer | Frontline Fall Protection |
|---|---|
| Model / SKU | CSQ184 |
| Material | High-strength alloy steel, galvanized with golden-yellow passivation |
| Gate | Quarter-turn locking, approx. 0.84 in opening, with safety pin |
| Minimum breaking strength | 9,000 lb |
| Gate strength | 3,600 lb |
| Net weight | 0.58 lb ± 0.02 lb |
| Standards | Conforms to ANSI Z359.12-2009, OSHA 1926 Subpart M and OSHA 1910 |
| Dimensions | Not published by Frontline; ask us |
| Region | Stocked in Paris, Ontario · ships Canada-wide |
Where crews use the Frontline CSQ184 steel carabiner
SRL to anchor
The safety pin keeps an SRL housing stable on the carabiner instead of rolling on the gate.
Lanyard to anchor strap
Connect a shock-absorbing lanyard to a cross-arm strap or anchorage connector.
Horizontal lifelines
A rated connector for attaching to HLL end anchors and trolleys.
Replacement hardware
Replace a worn or non-locking connector on an existing rig with a 3,600 lb gate.
Is the Frontline CSQ184 CSA certified? Compliance in Canada
Is the Frontline CSQ184 CSA certified?
We list Frontline connectors to ANSI Z359.12 and OSHA 1926/1910 only. If your site requires a CSA-marked connector, see our Safety Direct carabiners.
What is the gate opening on the CSQ184?
Approximately 0.84 in, per Frontline, with a safety pin for SRL stability.
What are the strength ratings?
9,000 lb minimum breaking strength and 3,600 lb gate strength, matching the ANSI Z359.12 gate requirement.
How much does it weigh?
0.58 lb, plus or minus 0.02 lb.
How often should the carabiner be inspected?
Before every use: check the gate locks fully, the body is not deformed or corroded, and the pin is in place. Remove it from service after any fall.
Pair the Frontline CSQ184 carabiner with your SRL and anchor
Use the CSQ184 to connect an SRL or lanyard to a rated anchor. Add a full-body harness for a complete personal fall arrest system.