Frontline RO2W 2-Way Standing Seam Roof Anchor | Canada
STANDING SEAM ANCHOROSHA 1910 / 1926 · NON-PENETRATINGMODEL RO2W
The Frontline RO2W is a two-piece clamp anchor for standing seam metal roofs. It bolts itself back together over the seam, so there is no hole in the panel and nothing to seal when the job is done. At under 5 lb it moves from one tie-off point to the next in minutes with basic hand tools, and it accepts self-retracting lifelines, shock-absorbing lanyards and vertical lifelines.
Frontline RO2W standing seam anchor key features
Frontline RO2W 2-way roof anchor specifications
| Model | RO2W · 2-Way Standing Seam Roof Anchor |
| Roof type | Standing seam metal roofs (clamp-on, non-penetrating) |
| Material | ASTM-rated steel, galvanized finish |
| Minimum breaking strength | 5,000 lb |
| User capacity | 130–310 lb |
| Weight | Under 5 lb |
| Included | Anchor, bolts and washers |
| Connectors accepted | Self-retracting lifelines, shock-absorbing lanyards, vertical lifelines |
| Standards | Meets or exceeds OSHA 1926 and OSHA 1910 · tested by an ISO/IEC 17025-accredited lab |
| Brand | Frontline Fall Protection |
CERTIFICATION — OSHA · NOT CSA
Frontline lists this product as tested to OSHA (and, where stated, ANSI) requirements by an independent lab accredited to ISO/IEC 17025. It is not CSA Z259 certified. If your site or jurisdiction requires CSA-marked fall protection, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Frontline RO2W standing seam roof anchor FAQ
Does the RO2W put holes in a standing seam roof?
No. The two halves clamp over the seam and bolt together, so the panel is never pierced and the roof warranty is not affected by fastener holes.
Which seam profiles does it fit?
Frontline does not publish a seam-profile list. Send us a close-up photo of one seam and the panel maker's name and we will confirm fit before you order.
Is the Frontline RO2W CSA certified?
No. It is rated to OSHA 1910 and 1926 and tested by an ISO/IEC 17025-accredited lab. For a CSA-marked anchor, see our Safety Direct collection.
What can I connect to it?
A self-retracting lifeline, a shock-absorbing lanyard or a vertical lifeline with rope grab, rated for one worker up to 310 lb.
How often should it be inspected?
Before every use, and formally by a competent person at least once a year. Remove it from service after any fall.