Malta Dynamics E-M2014 yellow perimeter warning flags
$33.99
Skip to product information
Malta Dynamics E-M2014 yellow perimeter warning flags
1/4
  • Malta Dynamics E-M2014 yellow perimeter warning flags
  • Malta Dynamics warning flags strung between roof edge cones
  • Malta Dynamics E-M2014 warning flags marking a flat roof
  • Malta Dynamics perimeter warning flags in use on a jobsite
Malta Dynamics E-M2014 105' Perimeter Warning Flags | Canada

Malta Dynamics E-M2014 105' Perimeter Warning Flags | Canada

$33.99

Malta Dynamics E-M2014 105' Perimeter Warning Flags. A 105 ft strand of safety yellow warning line with 42 flags, each 12 x 18 in. It strings between perimeter cones or stanchions to mark roof edges and open upper-level work areas. Cones and stanchions are sold separately.

⚠
Compliance in Canada: OSHA / ANSI, not CSAMalta Dynamics states the E-M2014 meets OSHA 1926.502(f) for warning line systems and exceeds the 500 lb required break strength. It is perimeter marking, not personal fall protection. It is not CSA Z259 certified. If your site or province requires CSA-marked fall protection, see our Safety Direct CSA range; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use. Inspect before each use and remove from service after any fall.
Equipment type
Warning line with flags
Length
105 ft (32 m) per strand
Flags
42, each 12 x 18 in
Break strength
Over 500 lb

Malta Dynamics E-M2014 perimeter warning flags features

  • 105 ft of high-visibility warning line with flags
  • 42 safety yellow flags per strand, each 12 x 18 in
  • Exceeds the 500 lb required break strength
  • Designed for about 8 ft spacing between stanchions
  • Malta Dynamics states it meets OSHA 1926.502(f) for warning line systems
  • Cones or stanchions sold separately

Malta Dynamics E-M2014 perimeter warning flag specifications

Manufacturer Malta Dynamics
Model / SKU E-M2014
Length 105 ft (32 m) per strand
Flags 42 per strand, 12 x 18 in (30 x 46 cm)
Colour Safety yellow
Break strength Exceeds 500 lb (227 kg)
Spacing About 8 ft (2.4 m) between stanchions
Weight 5 lb (2.3 kg)
Material Not published by Malta Dynamics; ask us
Standards OSHA 1926.502(f), as stated by Malta Dynamics

Where to use the Malta Dynamics E-M2014 warning flags

Flat roofs

String between cones to mark the edge zone.

Upper-level floors

Mark open edges on decks under construction.

Replacement line

Swap out a worn or faded strand on a warning line kit.

Extending a run

Add length to an existing cone layout.

Canadian store
Sold by Fall Protection Canada, Paris, Ontario. CAD pricing, no duties, no border surprises, Canada-wide shipping.

Malta Dynamics E-M2014 warning flag questions and CSA status

Is the Malta Dynamics E-M2014 flag line CSA certified?

No. No CSA rating is published; Malta Dynamics rates its equipment to OSHA/ANSI, not CSA. For CSA-marked equipment see our Safety Direct range.

Does the Malta Dynamics E-M2014 come with cones or stanchions?

No. Malta Dynamics sells the flag line only; cones or stanchions are sold separately.

How strong is the Malta Dynamics E-M2014 warning line?

Malta Dynamics says it exceeds the 500 lb required break strength.

How many flags are on the Malta Dynamics E-M2014 strand?

42 safety yellow flags, each 12 x 18 in, on a 105 ft strand.

Pair the Malta Dynamics E-M2014 flags with perimeter cones

Hang the E-M2014 on Malta Dynamics 39 in perimeter defense cones at about 8 ft spacing, or buy the complete 105 ft warning line kit. A warning line marks the hazard; workers at the edge still need a guardrail or fall arrest system.