Malta Dynamics C5115 4.5'–6' Stretch Single-Leg Shock-Absorbing Lanyard — Rebar + Snap Hook | Canada
SHOCK-ABSORBING LANYARDANSI Z359.13 / OSHA · NOT CSAMODEL C5115
The Malta Dynamics C5115 is a single-leg internal shock-absorbing lanyard that stretches from 4.5 ft at rest out to 6 ft in use, with a rebar hook at the anchorage end and a steel snap hook for the harness — built for tie-off to rebar, scaffolding and structural steel.
Malta Dynamics C5115 stretch rebar hook lanyard key features
Malta Dynamics C5115 stretch rebar hook lanyard specifications
| Model | C5115 |
| Product type | Shock-Absorbing Lanyard |
| Length | 4.5–6 ft stretch |
| Standards | ANSI Z359.13 / OSHA 1910 and 1926 (per Malta Dynamics) · not CSA Z259 |
| Brand | Malta Dynamics |
CERTIFICATION — ANSI Z359.13 / OSHA · NOT CSA
Malta Dynamics lists this product as meeting ANSI Z359.13 and OSHA 1910/1926 requirements. It is not CSA Z259 certified. If your site or jurisdiction requires CSA-marked fall protection, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Malta Dynamics C5115 stretch rebar hook lanyard FAQ for Canadian sites
Is the Malta Dynamics C5115 CSA certified for Canadian sites?
No. Malta Dynamics lists the C5115 as meeting ANSI Z359.13 and OSHA 1910/1926 requirements; it is not CSA Z259 certified. Many Canadian sites accept ANSI/OSHA-rated equipment, but confirm with your site safety officer and provincial OHS authority before use. If your site requires the CSA mark, see our Safety Direct collection.
How much fall clearance does the C5115 shock-absorbing lanyard need?
Plan for the lanyard length plus deceleration distance, your standing height and a safety margin — often around 18.5 ft below a foot-level anchor for a 6 ft energy-absorbing lanyard. Always verify against the manufacturer’s clearance chart.
How often should the C5115 shock-absorbing lanyard be inspected?
Inspect before every use and remove from service immediately if the energy absorber has deployed. A competent person should also perform a documented formal inspection at least annually.