Class ADL Full Body Harness in Canada (MH1011112)
The Safety Direct MH1011112 is a Class ADL full body harness built for Canadian crews who need fall arrest plus controlled descent capability. With a back D-ring for fall arrest and a front D-ring for descent and ladder-style work positioning, it’s a strong fit for contractors who must meet CSA Class ADL requirements on active job sites across Canada.
Quick answers (Canada)
- What is a Class ADL harness? A harness classification used when the worker may need controlled descent after a fall or during planned lowering.
- What’s the difference vs a standard fall arrest harness? Class ADL includes a front attachment point intended for descent / lowering alignment, in addition to the rear fall arrest point.
- Who buys this in Canada? Roofing, HVAC, industrial maintenance, telecom, and anyone pairing a harness with descent/rope access style systems.
CSA Class ADL – Descent-Ready
Class ADL harnesses are used when controlled descent may be required. The front D-ring supports proper alignment for descent or lowering devices, while the rear D-ring remains dedicated to fall arrest.
Parachute Fit for All-Day Wear
A stable “parachute-style” design with five points of adjustment helps keep the harness secure, comfortable, and properly positioned during extended shifts—especially on roofs and ladders.
Technical Specifications
| Model | MH1011112 |
| CSA Classification | Class ADL |
| D-Ring Configuration | Back D-ring (Fall Arrest) + Front D-ring (Controlled Descent) |
| Adjustment Points | 5-Point Adjustable |
| Webbing | 1 3/4" (45 mm) Polyester, 5,000 lb (22.5 kN) Minimum Tensile Strength |
| Worker Capacity | Up to 420 lb (191 kg) |
| Safety Features | Impact indicator, protected labels, built-in lanyard keeper |
| Connector Options | Pass-through, quick connect, or tongue & buckle |
| Customization | Max visibility or Kevlar® webbing, colour options, embroidery |
| Compliance | CSA Z259.10-18; meets or exceeds ANSI/ASSE Z359.11-2021 & OSHA 1910.140 |
Why Class ADL Matters on Canadian Job Sites
If your plan includes lowering a worker (planned descent) or providing a way to descend safely after a fall, Class ADL helps ensure your system is set up with the correct attachment point and device alignment. The front D-ring is the key difference—built for controlled descent scenarios while maintaining rear fall arrest capability.
Always confirm your descent device, connectors, and anchor are compatible with Class ADL configurations and your site plan.
Stocked in Canada • Class ADL • Fast Shipping
Want a compliant setup? We can help match: Class ADL harness + descent device + connector + certified anchor for your application.
Build a Class ADL System
Tell us your job type (roofing, ladder work, industrial), your anchor style, and whether you need descent—then we’ll recommend the right components.
Ask a Specialist