Super Anchor 1030 ARS Permanent Anchor 6-Pack For 2x4 Wood and Shake | Canada
Super Anchor 1030 ARS Permanent Anchor 6-Pack For 2x4 Wood and Shake manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
Super Anchor 1030 ARS Permanent Anchor 6-Pack For 2x4 Wood and Shake | Canada
The Super Anchor 1030 is the ARS permanent roof anchor for 2x4 top chords in a box of 6 complete kits. Each 14 gauge 430 stainless steel anchor has a 5,000 lb minimum breaking strength, installs 12 to 18 inches below the ridge with the factory 5/16 inch grade 8 bolt and teko nails, and seals with its TPE base flashing and ABS stem cover for a watertight permanent installation. What is included: 6 ARS 2x4 stainless anchors, 6 TPE base flashings, 6 ABS stem covers, 6 zip tie tether straps, and 6 fastener packs with bolts and teko nails. The anchor serves fall arrest and fall restraint on slopes up to 24/12, protects both sides of the roof from one location, and stays with the building as an ANSI Z359.18-17 Type D permanent anchorage. Compliant with OSHA 1926.502.
Typical Applications for the Super Anchor 1030
- Re-Roofing — Permanent anchors installed with every new roof.
- Solar Installation — Tie-off for panel crews on shingle and shake roofs.
- New Construction — Installed at sheathing stage for the whole build.
- Gutter and Maintenance — Homeowner-accessible tie-off for future service work.
- Chimney and Skylight Work — Anchorage near ridge for trades on steep slopes.
- Inspections — Safe roof access for inspectors and adjusters.
- Fall Restraint — Rigging that keeps workers off the edges entirely.
- Steep Slope Work — Rated for slopes up to 24/12.
Super Anchor 1030 Specifications
| Specification | Detail |
|---|---|
| SKU | 1030 |
| Model Fit | 2x4 top chords |
| Package | Box of 6 complete kits |
| What Is Included | 6 ARS 2x4 stainless anchors, 6 TPE base flashings, 6 ABS stem covers, 6 zip tie tether straps, and 6 fastener packs with bolts and teko nails |
| Material | 14 gauge 430 stainless steel anchor with stamped date of manufacture |
| Minimum Breaking Strength | 5,000 lb |
| Maximum Arrest Force | 3,600 lb (1,800 lb maximum fall arrest force times 2) |
| User Capacity | 1 person at 310 lb maximum including tools and equipment |
| Maximum Roof Slope | 24/12 |
| Temperature Range | -30 to +120 degrees F |
| Attachment | Super Anchor factory supplied 5/16 inch grade 8 bolt (bolt-under or bolt-thru) plus 3 teko nails per leg side |
| Anchor Placement | 12 to 18 inches below the hip or ridge, dual purpose for both roof sides |
| Service Zones | Fall arrest within 30 degrees of vertical center; fall restraint with no free fall exposure |
| Framing Requirement | Top chords capable of 5,000 lb or 2 times the intended load per OSHA 1926.502(d)(15) |
| Use Restrictions | Not for work positioning, horizontal lifelines, hoisting, or lifting |
| Compliance | OSHA 1926.502; ANSI Z359.18-17 Type D; certified for use in Quebec by a member of l'Ordre des ingenieurs du Quebec |
| Brand | Super Anchor Safety |
Super Anchor 1030 Standards — ANSI, OSHA & CSA Use in Canada
For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.
Buy the Super Anchor 1030 — Shipped Across Canada
Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.