Super Anchor 1033-PG CRA-PT 18" HLL Pass-Thru Anchor | Canada
$708.99
Skip to product information
Super Anchor 1033-PG CRA-PT 18" HLL Pass-Thru Anchor | Canada
1/2

Super Anchor 1033-PG CRA-PT 18" HLL Pass-Thru Anchor | Canada

$708.99

Super Anchor 1033-PG CRA-PT 18" HLL Pass-Thru Anchor documents

Super Anchor Safety's own documents.

Super Anchor Safety CRA-PT Series

Super Anchor 1033-PG CRA-PT 18" HLL Pass-Thru Anchor | Canada

The Super Anchor 1033-PG is an 18 inch CRA-PT pass-thru anchor post that carries a horizontal lifeline cable through its No. 1091 top as an intermediate anchor. The foam filled, hot dip galvanized 3.0 inch Schedule 40 riser stands on a 16x16x3/8 inch 52-hole base plate, and the anchor is third-party certified with a 5,000 lb ultimate strength. What is included: the pass-thru anchor post with 4 No. 5010-SM O-rings; HLL cable and rigging hardware are sold separately. Pass-thru tops are HLL intermediate anchors only, never a personal tie-off point.

Typical Applications for the Super Anchor 1033-PG

  • HLL Intermediate Anchor — Carries the lifeline between end anchors on long runs.
  • Commercial Flat Roofs — Bolted to structural members across the field of the roof.
  • Perimeter Lifelines — Continuous cable protection along roof edges.
  • Ballasted and Gravel Roofs — 18 inch riser keeps the cable above surfacing.
  • Concrete Decks — Wedge bolt, epoxy, or poured-in-place installations.

Super Anchor 1033-PG Specifications

Specification Detail
SKU 1033-PG
Model 1033-PG, CRA-PT 18 inch
Pass-Thru Top No. 1091 pass-thru top for 3/8 inch HLL cable with 4 No. 5010-SM O-rings.
Riser 18 inch height, 3.0 inch O.D. Schedule 40, polyurethane foam filled, ASTM 123 hot dip galvanized
Base Plate 16 x 16 x 3/8 inch with 52 fastener holes; use the 9/16 inch holes with a minimum of 4 certified 1/2 inch bolts
O-Rings 4 No. 5010-SM per pass-thru top, included
Ultimate Strength 5,000 lb minimum in any direction the load is applied
Proof Load Maximum 2,500 lb on site
Brand Super Anchor Safety

Super Anchor 1033-PG Standards — ANSI, OSHA & CSA Use in Canada

For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.

Buy the Super Anchor 1033-PG — Shipped Across Canada

Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.