Super Anchor 1050-G Horizontal Lifeline Rigging Kit — Galvanized
Super Anchor 1050-G Horizontal Lifeline Rigging Kit documents
Super Anchor Safety's own documents.
Super Anchor 1050-G Horizontal Lifeline Rigging Kit — Galvanized | Canada
A horizontal lifeline is only as good as the hardware at each end of it. The 1050-G rigging kit supplies the engineered termination components — attachment bolts, lock nuts, couplers and wire rope hardware — needed to terminate a horizontal lifeline run properly rather than improvising with generic rigging from the hardware store. Galvanized for exposed rooftop service and sized for runs up to 120 feet, it is designed to work with Super Anchor CRA commercial roof anchor posts, making it the natural next order for any contractor already running CRA posts on flat commercial decks.
Key Features of the Super Anchor 1050-G Horizontal Lifeline Rigging Kit
- Complete engineered termination hardware set for horizontal lifeline runs
- Includes the 1058 turnbuckle, 1065-AS spring energy absorber, couplers, eye thimbles, cable clamps, 5010-SM O-rings and bolts
- For HLL runs typically up to 120 ft, with pass-thru anchors spaced 20 to 30 ft
- Built for Super Anchor 3/8 in. 7x19 galvanized HLL cable (No. 1055-X, ordered separately)
- Hot-dip galvanized finish for long-term exposure on Canadian commercial roofs
- For Super Anchor CRA and other anchors with No. 1090 loop tops
- Also available in stainless steel as the 1051-S for coastal and corrosive environments
Super Anchor 1050-G Specifications — Span, Cable Size & Finish
| Specification | Detail |
|---|---|
| Model | 1050-G (galvanized) — 1051-S available in stainless steel |
| Kit Type | Horizontal lifeline rigging and termination hardware kit |
| Run Length | Typically up to 120 ft, pass-thru anchors 20 to 30 ft on center (Super Anchor 2021 rigging manual) |
| Cable Size | 3/8 in. 7x19 galvanized HLL cable, No. 1055-X, ordered separately |
| Finish | Galvanized |
| Pairs With | Super Anchor CRA commercial roof anchor posts |
| Important | Rigging hardware kit — lifeline cable is ordered separately to your required length |
CSA Z259 & OSHA Horizontal Lifeline Compliance for Canadian Commercial Roofs
Horizontal lifeline systems in Canada are governed by the CSA Z259 series and provincial OHS regulation, and must be designed by a qualified person with documented anchorage capacity, calculated sag and deflection, defined maximum number of users, and adequate fall clearance below the working surface. ANSI Z359 and OSHA 1926.502 apply on cross-border work. Super Anchor's own documents are linked at the top of this page.
Buy the Super Anchor 1050-G HLL Rigging Kit — Shipped Across Canada
Ordering cable and anchor posts too? Call us and we will spec the full run so nothing arrives short.