Super Anchor 2835 WS TrussBar Attic & Overhang Anchor | Canada
Super Anchor 2835 WS TrussBar Attic & Overhang Anchor manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
TRUSS OVERHANG & ATTIC ANCHOR · 1 WORKERANSI Z359.1-07 · OSHA 1926.502PART 2835 · 6.5 LB ALUMINUM
The Super Anchor WS TrussBar is a lightweight aluminum anchor that installs inverted on truss overhangs, so painters and other exterior trades get a tie-off point at the eave. It adjusts for trusses at 12, 16 or 24 in on centre with a minimum 2x4 top chord and fastens with ten reusable WS wood screws. It can also serve as a permanent tie-off point for attic access where confined space standards call for one.
Super Anchor 2835 WS TrussBar overhang anchor key features
How to install the WS TrussBar on a truss overhang or attic
Read Super Anchor's WS TrussBar manual and truss overhang addendum before use. Set the bar inverted across the truss overhangs, adjust it to the truss spacing (12, 16 or 24 in on centre, minimum 2x4 top chord) and drive the ten supplied 2 in WS screws. Super Anchor calls for a minimum 22 in eave overhang. One worker ties off with a lifeline or SRL. Super Anchor's overhang addendum says not to use overhang-installed bars for horizontal lifelines or more than 1 person; its 2022 manual allows two attic-installed bars to carry a 1335 or 1336 horizontal lifeline at up to 20 ft spacing. Replacement screws: 2084-2.0, 2084-2.5, 2084-3.0 and 2084-3.5.
Super Anchor 2835 WS TrussBar attic anchor specifications
| Part | 2835 · WS TrussBar single anchor with screws (UPC 786158283501) |
| Device | 1 person anchorage device for inverted install on truss overhangs |
| Rating | Fall arrest and fall restraint |
| Structure | Minimum 2x4 truss spaced 12, 16 or 24 in |
| Minimum tensile strength | 5,000 lb |
| Maximum user weight | 310 lb per anchor |
| Material | Aluminum grade 5052, 6.5 lb |
| Fasteners | 10 x 2.0 in WS series wood screws |
| Hardware | M12 x 30 mm stainless steel with lock nut |
| Standards | OSHA 1926.502(b)(4)(i), OSHA 1926.1203(e)(2)(ii) · ANSI Z359.1-07 |
CERTIFICATION — ANSI Z359.1 / OSHA 1926.502 · NOT CSA
Super Anchor Safety lists this product to ANSI Z359.1-07 and OSHA 1926.502(b)(4)(i) / 1926.1203(e)(2)(ii) (US fall protection standards). Its page shows no CSA Z259 mark, so treat it as not CSA certified. If your site or jurisdiction requires CSA-marked equipment, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Super Anchor WS TrussBar attic anchor questions and answers
What truss spacing does the WS TrussBar fit?
12, 16 or 24 in on centre, with a minimum 2x4 top chord.
Can the WS TrussBar stay in the attic as a permanent tie-off?
Yes. Super Anchor says it can be used as a permanent tie-off point for attic access as confined space standards require.
Is the Super Anchor WS TrussBar CSA certified?
Super Anchor lists OSHA 1926.502 and ANSI Z359.1-07; its page shows no CSA mark. See Safety Direct for CSA anchors.
Can two WS TrussBars carry a horizontal lifeline?
In the attic installation, yes — Super Anchor's 2022 manual allows its 1335 or 1336 HLL cables at a maximum spacing of 20 ft. Its truss overhang addendum says not to use overhang-installed bars for horizontal lifelines or more than 1 person.