Super Anchor P-6001 Pro-Series Fall Arrester Harness | 5 Colours, 5 Sizes
Super Anchor P-6001 Pro-Series Fall Arrester Harness manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
5-POINT FULL BODY HARNESSANSI Z359.11 · CSA Z259.10 · TYPE AMODEL P-6001
The Super Anchor P-6001 Pro-Series Fall Arrester harness is a lightweight 5-point full body harness with a dorsal D-ring, quick connect chest and leg strap buckles and closed-loop shoulder straps. Super Anchor's 2025 manual covers it as a 6001-series harness, Type A, for fall arrest and fall restraint. The Hi-Viz and Ultra-Viz versions have a heat-applied 3M reflective strip on both sides of the webbing.
Super Anchor P-6001 Pro-Series harness key features
How do you fit the Super Anchor P-6001 harness?
Per Super Anchor's manual: with a second person's help, slide the back strap through the D-pad slots so the dorsal D-ring sits 6–12 in. below the shoulders. Buckle the chest strap, align the straps and set it about 8–12 in. below the shoulders, then buckle and snug the leg straps. Super Anchor warns that a badly adjusted harness can let a worker fall out of it. Connect fall arrest equipment only to the dorsal D-ring, through an energy absorber or an SRL.
Super Anchor P-6001 harness specifications
| Model | P6001, 5 colours × Small to 2X-Large |
| Type | 5-point full body harness, Type A (fall arrest and fall restraint) |
| Capacity | 130–310 lb (ANSI Z359.11-2021) · 130–352 lb (CSA Z259.10-18), including tools |
| Webbing | 1-3/4 in. (45 mm) polyester, 6,000 lb minimum tensile |
| D-ring | Dorsal, 5,000 lb minimum, zinc plated |
| Buckles | Quick connect chest and leg strap buckles |
| Harness stretch | 14 in. maximum; include it in fall clearance |
| Inspection | Before each use; by a competent person at least annually |
| Standards | ANSI Z359.11-21 · OSHA 1926.502 · CSA Z259.10-18 |
CERTIFICATION — ANSI Z359.11-21 · CSA Z259.10-18 · OSHA 1926.502
Super Anchor's 2025 5-point harness manual lists the 6001 series as Type A to ANSI Z359.11-21 and OSHA 1926.502, and the harness label in it lists CSA Z259.10-18 with a 130–352 lb capacity. Check the markings on your harness label and confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Super Anchor P-6001 harness questions and answers
What is the weight capacity of the Super Anchor P-6001?
130–310 lb including tools under ANSI Z359.11-2021, and 130–352 lb under CSA Z259.10-18, per the label in Super Anchor's manual. Super Anchor's size chart lists 2X-Large for people up to 400 lb, but that is a fit guide, not the harness capacity.
Which P-6001 size do I need?
Use Super Anchor's 5-point sizing chart linked above, which matches size to height and weight. Super Anchor notes that sizing is not perfect because body shapes vary.
Do I need an energy absorber with this harness?
Yes. Super Anchor's manual requires an ANSI or CSA compliant energy absorber rated for your weight, or an SRL, between the dorsal D-ring and the anchor. Never attach a lifeline or lanyard straight to the harness webbing.
How much does the harness stretch in a fall?
Up to 14 in., per Super Anchor's manual. Include it when you work out fall clearance.