Malta Dynamics BYO PFAS Fall Arrest Kit | Canada

FALL ARREST KIT · 1 PERSONANSI Z359.13 · OSHA 1926 SUBPART M25 FT OR 50 FT LIFELINE

The Malta Dynamics Build Your Own Personal Fall Arrest System (PFAS) is a bundled roofer's kit: you choose a Warthog full-body harness model and size, plus a 25 ft or 50 ft vertical lifeline assembly. Each kit also includes a reusable 21 in roof anchor for temporary use on wood rooftops and an equipment duffle bag. The system is rated for one worker weighing 130 to 310 lb.

Malta Dynamics BYO PFAS fall arrest kit key features

✓Choice of six Warthog full-body harness models in sizes S-M to 3XL

✓25 ft or 50 ft vertical lifeline of reinforced 3-strand poly rope, 5,000 lb minimum breaking strength

✓Rope grab positioning device with 18 in lanyard extension and integrated shock absorber

✓Self-locking snap hook connector; harness connects at the dorsal D-ring

✓Reusable 21 in low-profile roof anchor for temporary use on wood roofs, single-person anchorage

✓18 x 10 x 10 in duffle bag (50% recycled material) with two zippered compartments and shoulder strap

How to use and inspect the Malta Dynamics BYO PFAS kit

Malta Dynamics does not publish step-by-step installation instructions on this product page. Its use guidance says the harness must fit properly to limit fall arrest forces, and the system connects at the harness dorsal D-ring. A qualified person should inspect all components before reuse, and any component showing wear indicators should be replaced. Any gear that has arrested a fall must be removed from service immediately, even if no damage is visible. Compliance depends on proper use, a current rescue plan and oversight by a qualified person.

Malta Dynamics BYO PFAS fall arrest kit specifications

Kit contents	Full-body harness, vertical lifeline assembly, 21 in roof anchor, duffle bag
Harness options	Warthog B2002, B2002-X, B2202, B2000, B2102 or B1102 series
Harness sizes	S-M, L-XL, 2XL, 3XL (varies by model)
Harness materials	High-strength nylon and polyester webbing, galvanized steel D-ring
Capacity	130 to 310 lb, one worker
Lifeline length	25 ft (C7010) or 50 ft (C7020)
Lifeline rope	Reinforced 3-strand poly rope, 5,000 lb minimum breaking strength
Positioning device	Rope grab with 18 in lanyard extension and integrated shock absorber
Connector	Self-locking snap hook
Roof anchor	21 in reusable, low-profile, temporary use on wood rooftops, single-person anchorage
Bag	18 x 10 x 10 in, 50% recycled material, two zippered compartments
Standards	ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M and OSHA 1910

CERTIFICATION — ANSI / OSHA · NOT CSA

Malta Dynamics certifies this equipment to ANSI Z359.13-13, ANSI A10.32-12, OSHA 1926 Subpart M and OSHA 1910 (US fall protection standards). Malta Dynamics products are not CSA certified. If your site or jurisdiction requires CSA Z259 equipment, shop our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.

Malta Dynamics Build Your Own PFAS kit questions and answers

Which harness models can I pick for the Malta Dynamics BYO PFAS?

Six Warthog models: Tongue and Buckle (B2002), Tongue and Buckle X (B2002-X), Comfort MAXX Belted Side D-Ring (B2202), Pass Thru (B2000), MAXX Belted Side D-Ring (B2102) and Side D-Ring (B1102). Available sizes vary by model.

What is the weight capacity of the Malta Dynamics BYO PFAS kit?

Malta Dynamics rates the harness, vertical lifeline assembly and roof anchor for one worker weighing 130 to 310 lb.

What roof types is the 21 in roof anchor in this kit made for?

The maker lists the reusable 21 in roof anchor for temporary use on wood rooftops, as a single-person anchorage point, with a low profile that suits a range of roof pitches.

What should I do after the BYO PFAS kit has arrested a fall?

Remove any gear that has arrested a fall from service immediately, even if no damage is visible. A qualified person should inspect all components before reuse.