Malta Dynamics TR1000 temporary guardrail post in safety yellow
Single post
$113.99
Skip to product information
Malta Dynamics TR1000 temporary guardrail post in safety yellow
1/4

Malta Dynamics TR1000 Temporary Guardrail Post, Steel | Canada

$113.99
Pack

Malta Dynamics TR1000 Temporary Guardrail Post. A weld-free, removable carbon steel post for building 2x4 lumber guardrail at open edges. Posts go up to 8 ft apart and fasten to the jobsite edge with screws (not included). Sold singly or in a 5-pack.

⚠
Compliance in Canada: OSHA / ANSI, not CSAMalta Dynamics states the TR1000 meets and exceeds OSHA standards for fall protection; it names no specific standard number on its page. It is not CSA Z259 certified. If your site or province requires CSA-marked fall protection, see our Safety Direct CSA range; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use. Inspect before each use and remove from service after any fall.
Equipment type
Temporary guardrail post
Material
Powder-coated carbon steel
Post spacing
Up to 8 ft (2.4 m)
Rails
2x4 lumber (not included)

Malta Dynamics TR1000 temporary guardrail post features

  • Unibody carbon steel post with no welds
  • Removable, can be reused; lightweight and stackable
  • Safety yellow powder coat for visibility and weather resistance
  • Posts can be installed up to 8 ft apart
  • Takes 2x4 construction-grade lumber for top rail, mid rail and toe board
  • Recommended 12 in overlap of lumber rails on all sides
  • Configuration options for concrete slope walls and curb drops
  • Detailed instructions included; fasteners not included

Malta Dynamics TR1000 guardrail post specifications

Manufacturer Malta Dynamics
Model / SKU TR1000 (single), TR1000-5 (5-pack)
Material Carbon steel, powder-coated safety yellow
Weight 7 lb (3.2 kg) per post
Post spacing Up to 8 ft (2.4 m)
Rails 2x4 construction-grade lumber, 12 in overlap recommended (lumber not included)
Fasteners 11 x 3 in #12 stainless steel screws, 11 x 1/4 in Tapcon screws 3 in or longer, or 11 x #12 zinc screws 3 in or longer (not included)
Rated load Supports up to 310 lb of worker weight, including tools and clothing, per Malta Dynamics
Dimensions Not published by Malta Dynamics; ask us
Standards OSHA fall protection, as stated by Malta Dynamics (no standard number given)

Where to use the Malta Dynamics TR1000 guardrail post

Flat roofs

Build lumber guardrail along open roof edges.

Floor edges

Guard slab edges and openings during framing and concrete work.

Slope walls and curbs

Use the configuration options for concrete slope walls and curb drops.

Move between jobs

Remove, stack and move posts to the next job.

Canadian store
Sold by Fall Protection Canada, Paris, Ontario. CAD pricing, no duties, no border surprises, Canada-wide shipping.

Malta Dynamics TR1000 guardrail post questions and CSA status

Is the Malta Dynamics TR1000 guardrail post CSA certified?

No. No CSA rating is published; Malta Dynamics rates its equipment to OSHA/ANSI, not CSA. For CSA-marked equipment see our Safety Direct range.

Does the Malta Dynamics TR1000 come with screws or lumber?

No. Fasteners and 2x4 lumber are not included; Malta Dynamics lists the screw options.

How far apart can Malta Dynamics TR1000 posts be installed?

Malta Dynamics says up to 8 ft apart, with a 12 in rail overlap recommended.

What load is the Malta Dynamics TR1000 post rated to support?

Malta Dynamics says up to 310 lb of worker weight, including tools and clothing.

Pair the Malta Dynamics TR1000 post with lumber and screws

Order enough TR1000 posts for 8 ft maximum spacing, plus 2x4 lumber for top rail, mid rail and toe board and the screws Malta Dynamics specifies. Have the layout checked against your provincial guardrail rules by a competent person.