Malta Dynamics HHW4004 Full Brim Type 2 Class C Safety Helmet | Canada
Malta Dynamics HHW4004 Full Brim Type 2 Class C Safety Helmet spec sheet and documents
- PDFSpecification sheet (HHW4004, HHY4004, HHG4004, HHBLK4004)
- PDFANSI and EN declaration of conformity (HHW4004, HHY4004, HHG4004, HHBLK4004)
Malta Dynamics' own documents.
SAFETY HELMETANSI Z89.1 TYPE 2 CLASS C · NOT CSAMODEL HHW4004
The Malta Dynamics APEX HHW4004 is a full-brim Type 2 Class C safety helmet rated for top, side, front and rear impacts. The full brim adds all-round shade and shelter from rain and falling debris, the vented ABS shell keeps air moving in the heat, and a 6-point ratchet suspension (sizes 6½ to 8) with a removable 4-point chin strap keeps it secure. Sold singly or in packs of 5 and 10.
Malta Dynamics APEX HHW4004 full brim Class C helmet key features
Malta Dynamics APEX HHW4004 full brim Class C helmet specifications
| Model | HHW4004 (white) · HHY4004 (yellow) · HHG4004 (grey) · HHBLK4004 (black) · HHO4004 (orange) · HHR4004 (red) |
| Standard | ANSI Z89.1-2014 Type 2 Class C |
| EN 12492 | Requirements listed in Malta Dynamics' declaration |
| Impact protection | Top, side, front and rear |
| Electrical rating | Class C — no electrical protection |
| Shell | Vented ABS, full brim |
| Suspension | 6-point ratchet (6½–8) |
| Chin strap | 4-point, removable, harness loop |
| Pack | 1, 5 or 10 helmets |
| Brand | Malta Dynamics |
CERTIFICATION — ANSI Z89.1 TYPE 2 CLASS C · NOT CSA Z94.1
Malta Dynamics rates the HHW4004 series to ANSI Z89.1-2014 Type 2 Class C. It is not CSA Z94.1 certified, and as a Class C helmet it gives no electrical protection. If your site or province requires CSA-marked head protection, confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Malta Dynamics APEX HHW4004 full brim helmet FAQ for Canadian sites
Is the Malta Dynamics APEX HHW4004 CSA certified?
No. It is rated to ANSI Z89.1-2014 Type 2 Class C, not CSA Z94.1. Confirm with your site safety officer and provincial OHS authority whether ANSI-rated head protection is accepted on your site.
Does the HHW4004 protect against electrical hazards?
No. The HHW4004 is a vented Class C helmet and is not rated for electrical protection. For electrical exposure, choose the APEX HHW3004 Class E full-brim helmet.
Which earmuffs fit the HHW4004 full brim helmet?
The Malta EM0002 full-brim earmuffs are engineered for APEX Type 2 Full Brim helmets.
How often should the HHW4004 be replaced?
Inspect the shell and suspension before every use and replace the helmet after any significant impact, even if no damage is visible, or if you find cracks, frayed straps or other wear, as Malta Dynamics' helmet instructions direct.