Super Anchor 1003 ARS I-Joist Permanent Roof Anchor 3-Pack | Canada
Super Anchor 1003 ARS I-Joist Permanent Roof Anchor 3-Pack manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
Super Anchor 1003 ARS I-Joist Permanent Roof Anchor 3-Pack | Canada
The Super Anchor ARS I-Joist anchor carries the same features and benefits as the ARS series but is shaped to fit engineered I-joists. It covers the two most common flange widths, 1-3/4 inch up to 2-3/4 inch, and installs using the drill through method with optional backer boards for a secure fit. The anchor is fabricated from 11 gauge stainless steel. Like the rest of the ARS line, the I-Joist anchor is compatible with the full range of Super Anchor flashing bases and stem covers for a waterproof asphalt or metal roof installation. It meets OSHA 1926.502 and ANSI Z359.18-17 Type D with a 5,000 pound minimum breaking strength. This product is sold as a 3-pack.
Key Features of the Super Anchor 1003
- Fits engineered I-joists — Shaped to fit the two most common flange widths, 1-3/4 inch up to 2-3/4 inch.
- Drill through install — Installs with the drill through method, with optional backer boards for a secure fit.
- 11 gauge stainless steel — Corrosion resistant construction rated to a 5,000 lb minimum breaking strength.
- Flashing compatible — Works with any Super Anchor flashing base and stem cover for asphalt or metal roofs.
- ARS design criteria — Shares the proven ARS fall arrest design and compliance.
- Permanent anchor point — Stays with the structure for long term roof access.
Who Needs the Super Anchor 1003?
The ARS I-Joist anchor is a permanent fall arrest anchor for builders and roofers working on homes framed with engineered I-joists rather than dimensional lumber top chords. Its shape fits the common I-joist flange widths that a standard 2x anchor cannot. Complete the system with a full-body harness, a connecting device, and a competent-person layout.
Typical Applications for the Super Anchor 1003
- I-joist framed roofs — Permanent tie-off where I-joists replace dimensional top chords.
- Production home building — Anchor layout across engineered lumber roofs.
- Re-roofing — Compliant tie-off on I-joist structures.
- Roof maintenance — Long term access point for service trades.
Super Anchor 1003 Specifications
| Specification | Detail |
|---|---|
| SKU | 1003-D-3PK |
| Manufacturer Part Number | 1003-D |
| Type | Permanent I-joist roof anchor |
| Fit range | 1-3/4 in up to 2-3/4 in I-joist flange |
| Material | 11 gauge stainless steel |
| Min breaking strength | 5,000 lb (22 kN) |
| Max arrest force | 3,600 lb (16 kN) |
| Max user weight | 310 lb (140 kg) including tools and equipment |
| Max slope | 24/12 |
| Flashing | Compatible with all ARS flashing bases; sold separately |
| Standards | OSHA 1926.502; ANSI Z359.18-17 Type D |
| Brand | Super Anchor Safety |
Super Anchor 1003 Standards — ANSI, OSHA & CSA Use in Canada
OSHA 29 CFR 1926.502: Federal construction fall protection anchorage requirements. ANSI Z359.18-17 Type D: American National Standard for anchorage connectors, Type D. For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.
Safety note: This anchor is a fall arrest anchorage, not a complete system. Install onto framing capable of supporting 5,000 lb or two times the intended load, use a full-body harness with a connecting device, and confirm fall clearance.
Buy the Super Anchor 1003 — Shipped Across Canada
Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.