Super Anchor 1014 Temporary ARS 2x8 Truss Anchor | Canada
Super Anchor 1014 Temporary ARS 2x8 Truss Anchor manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
TRUSS ANCHOR · 1 WORKERANSI Z359.1-07 · OSHA 1926.502PART 1014 · 2x4 TO 2x8
The Super Anchor Temporary ARS 2x8 Anchor gives framers a quick, easy anchorage connector for lanyards, lifelines and SRLs. It follows the same design principles as Super Anchor's ARS permanent roof anchors, but it is made for temporary use: it drops over a truss or rafter and locks with a 3/8 in stainless steel detent pin on an elastic tether. Part 1014 fits 2x4, 2x6 and 2x8 trusses and rafters.
Super Anchor 1014 Temporary ARS truss anchor key features
How to install the Temporary ARS anchor on a truss or rafter
Set the anchor over the truss or rafter and lock it with the stainless detent pin, following Super Anchor's ARS No. 1014 temporary anchor instruction manual. One worker connects a lanyard, lifeline or SRL. Pull the pin to remove it and reuse it at the next location. Replacement detent pin: 2015-2.2-6.
Super Anchor 1014 Temporary ARS 2x8 anchor specifications
| Part | 1014 · Temporary ARS 2x8 Anchor, fits 2x4, 2x6 and 2x8 trusses/rafters (UPC 786158101409) |
| Device | Truss anchor for 1 person fall protection, temporary use |
| Rating | Fall arrest and fall restraint |
| Minimum breaking strength | 5,000 lb (average tensile 5,000 lb) |
| Maximum user weight | 310 lb including tools and equipment |
| Material | 11-gauge steel |
| Hardware | 3/8 in stainless steel locking detent pin (replacement 2015-2.2-6) |
| Standards | OSHA 1926.502 · ANSI Z359.1-07 |
CERTIFICATION — ANSI Z359.1 / OSHA 1926.502 · NOT CSA
Super Anchor Safety lists this product to ANSI Z359.1-07 and OSHA 1926.502 (US fall protection standards). Its page shows no CSA Z259 mark, so treat it as not CSA certified. If your site or jurisdiction requires CSA-marked equipment, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Super Anchor 1014 Temporary ARS anchor questions and answers
What truss sizes does the Super Anchor 1014 fit?
Super Anchor lists part 1014 for 2x4, 2x6 and 2x8 trusses and rafters.
How much weight is the Temporary ARS anchor rated for?
One worker up to 310 lb including tools and equipment, with a 5,000 lb minimum breaking strength.
Is the Super Anchor Temporary ARS anchor CSA certified?
Super Anchor lists OSHA 1926.502 and ANSI Z359.1-07; its page shows no CSA mark. See Safety Direct for CSA anchors.
Is the 1014 a permanent ARS roof anchor?
No. It shares the ARS design but is a temporary, pinned anchor you remove and reuse.