Super Anchor 1042-4G CRA-4 24" 4-Way Anchor Post | Canada
$951.99
Skip to product information
Super Anchor 1042-4G CRA-4 24" 4-Way Anchor Post | Canada
1/2

Super Anchor 1042-4G CRA-4 24" 4-Way Anchor Post | Canada

$951.99

Super Anchor 1042-4G CRA-4 24" 4-Way Anchor Post documents

Super Anchor Safety's own documents.

Super Anchor Safety CRA-4 Series

Super Anchor 1042-4G CRA-4 24" 4-Way Anchor Post | Canada

The Super Anchor 1042-4G is a 24 inch CRA-4 4-way anchor post, the riser that anchors horizontal lifeline intersections when fitted with the No. 1054 4-Way Top Fixture, sold separately. The foam filled, hot dip galvanized 3.0 inch Schedule 80 riser stands on a 12-hole 16x16x5/8 inch base plate, and the anchor is third-party certified with a 5,000 lb ultimate strength. What is included: the riser post with base plate only; the No. 1054 top fixture is not included. The bare riser tube accepts the No. 1054 4-Way Top Fixture, which is required and sold separately, secured with a 1/2 x 4-1/2 inch stainless attachment bolt and 3 set screws.

Typical Applications for the Super Anchor 1042-4G

  • HLL Intersections — T, 90 degree, 45 degree, and 4-way run junctions.
  • Multi-Run Roof Systems — Ties several lifeline runs to one anchor point.
  • Deep Overburden Roofs — 24 inch riser rises above vegetative and paver systems.
  • Single Person Tie-Off — Loop top PPE anchorage via the 1054 fixture.
  • Concrete Decks — Wedge bolt, epoxy, or poured-in-place installations.

Super Anchor 1042-4G Specifications

Specification Detail
SKU 1042-4G
Model 1042-4G, CRA-4 24 inch
Top Fixture No. 1054 4-Way Top Fixture required, sold separately; attaches with a 1/2 x 4-1/2 inch stainless hex bolt with seal washers both ends plus 3 set screws
Riser 24 inch height, 3.0 inch O.D. Schedule 80 [8mm], polyurethane foam filled, ASTM 123 hot dip galvanized
Base Plate 16 x 16 x 5/8 inch with 12 bolt holes for 1/2 inch bolts
Ultimate Strength 5,000 lb minimum in any direction the load is applied
Proof Load Maximum 2,500 lb on site
Design Load 1,250 lb at a 4 to 1 design factor
Brand Super Anchor Safety

Super Anchor 1042-4G Standards — ANSI, OSHA & CSA Use in Canada

For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.

Buy the Super Anchor 1042-4G — Shipped Across Canada

Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.