Super Anchor 1126-6A CRZ-6A 6" Z-Purlin Loop Top Anchor | Canada
Super Anchor 1126-6A CRZ-6A 6" Z-Purlin Loop Top Anchor documents
Super Anchor Safety's own documents.
Super Anchor 1126-6A CRZ-6A 6" Z-Purlin Loop Top Anchor | Canada
The Super Anchor 1126-6A, part name CRZ-6A, is a permanent bolt-thru roof anchor built for the standard Z-purlins used in steel and commercial building structures. A No. 1090 cast steel loop top rated at 10,000 lb tensile strength sits on a 6 inch, foam-filled, hot-dip galvanized 3.0 inch Schedule 40 riser, and two 3/8 inch steel legs straddle the purlin so stainless steel bolts pass through the purlin web. The anchor carries a 5,000 lb minimum strength in any direction of applied load, and the loop top sits parallel with the ridge, which is the A orientation.
Typical Applications for the Super Anchor 1126-6A
- Metal Buildings — Permanent tie-off on pre-engineered steel buildings framed with Z-purlins.
- Single-Person Anchor — Fall arrest or fall restraint for one worker up to 310 lb.
- HLL End Anchor — End anchorage for Super Anchor horizontal lifeline systems.
- HLL Intermediate — Loop top intermediate support along a horizontal lifeline run.
- Window Washing — Suspension or fall-arrest anchorage in accordance with ANSI/IWCA I-14.1.
Super Anchor 1126-6A Specifications
| Specification | Detail |
|---|---|
| Type | Permanent bolt-thru Z-purlin roof anchor, loop top, parallel (A) orientation |
| SKU | 1126-6A |
| Loop Top | No. 1090 Q235 cast steel, 1-3/8 inch inside diameter, 10,000 lb tensile strength rating |
| Riser | 6 inch height, 3.0 inch O.D. Schedule 40 pipe with 0.203 inch wall, polyurethane foam filled, stainless threaded vent hole plug |
| Legs | 3/8 inch A-36 or Q235 steel, 4 inch leg inside dimension, 6 inch nominal leg width |
| Finish | Hot-dip galvanized, ASTM 123 |
| Attachment Bolts | 3/8 inch 18-8 stainless steel bolts and lock nuts, supplied: 3/8 x 1-1/4 inch flange bolt and 3/8 x 5 inch through bolts |
| Purlin Fit | Standard Z-purlins with a maximum top flange width of 3-3/4 inches and a minimum web depth of 6 inches |
| Brand | Super Anchor Safety |
Super Anchor 1126-6A Standards — ANSI, OSHA & CSA Use in Canada
For Canadian worksites, confirm the CSA Z259 documentation your province requires before use — Super Anchor's own documents are linked at the top of this page.
Buy the Super Anchor 1126-6A — Shipped Across Canada
Questions about fit, compatibility or a full system? Contact Fall Protection Canada before you order.