Super Anchor 2100 Flex Chain Anchor | Temporary Roof Anchor | Canada
Super Anchor 2100 Flex Chain Anchor manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
TEMPORARY / REUSABLE ROOF ANCHORANSI Z359.1-07 · OSHA 1926.502PART 2100
The Super Anchor Flex Chain Anchor (part 2100) is a temporary, reusable anchor for wood-framed structures. Two zinc-coated steel legs on a rubber flex band straddle the ridge or lie flat on the deck, and a forged 3 in O-ring connector slides along the link chain so the tie-off point follows the worker. It nails or screws down with the fasteners in the box and serves one person for fall arrest or restraint, or as a horizontal lifeline anchorage point.
Super Anchor 2100 Flex Chain Anchor key features
How to install the Flex Chain Anchor on a wood-framed roof
Set the anchor over the ridge or on the deck with both legs bearing on framing, then fasten through the 7/32 in and 9/32 in holes with the factory 16d duplex nails (up to 12/12 pitch) or the 3-1/2 in WS hex-head screws (up to 24/12 pitch), as Super Anchor's instruction manual directs. Clip your lanyard or SRL to the sliding O-ring. Pull the fasteners to move the anchor to the next location; replacement nails (2012-A) and screws (2084-3.5) are sold separately.
Super Anchor 2100 Flex Chain Anchor specifications
| Part | 2100 · Flex Chain Anchor with two fastener options (UPC 786158210002) |
| Structure | Wood-framed structures; adjustable pitch roof anchor |
| Rating | Fall arrest and fall restraint, 1 person |
| Minimum breaking strength | 5,000 lb (average tensile strength 5,000 lb) |
| Hardware proof test | 3,600 lb |
| Maximum user weight | 310 lb including tools and equipment |
| Legs | 6 mm Q235 zinc-coated steel (1/4 in) |
| Hinge | 6 mm rubber belt material |
| Connector | Link chain with 3/8 in x 3.0 in forged steel sliding O-ring |
| Fastener holes | 7/32 in and 9/32 in |
| Included fasteners | 12 x 16d duplex nails, 6 x 3-1/2 in WS hex head screws |
| Standards | OSHA 1926.502 · ANSI Z359.1-07 (connector ring ANSI Z359.12-09 / CSA Z259.12-11) |
CERTIFICATION — ANSI Z359.1-07 / OSHA 1926.502 · NOT CSA
Super Anchor's 2024 instruction manual lists this anchor to OSHA 1926.502 and ANSI Z359.1-07 (US fall protection). Only its connector ring carries a CSA standard (CSA Z259.12-11); no CSA anchor standard is listed, so treat the anchor as not CSA certified. If your site or jurisdiction requires CSA-marked anchors, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Super Anchor 2100 Flex Chain roof anchor FAQ
Is the Super Anchor Flex Chain Anchor reusable?
Yes. Super Anchor lists it as a temporary/reusable anchor: pull the fasteners and move it to the next spot.
What roof pitch does the Flex Chain Anchor handle?
Up to 24/12 with the screws, 12/12 with the nails, and it can lie flat on a deck.
Can two workers tie off to one Flex Chain Anchor?
No. It is rated for one person for fall arrest or restraint, or as one anchorage point for a horizontal lifeline.
Is the Super Anchor 2100 Flex Chain CSA certified?
Super Anchor's 2024 manual lists OSHA 1926.502 and ANSI Z359.1-07 for the anchor; only the connector ring carries a CSA standard (CSA Z259.12-11). See Safety Direct for CSA anchors.
What replacement fasteners fit the 2100?
Part 2012-A (36 x 16d zinc duplex nails) or 2084-3.5 (25 x 3-1/2 in WS screws), sold separately.