Super Anchor DE-6001 Dielectric Harness | Canada
Super Anchor DE-6001 Dielectric Harness manual and documents
Super Anchor Safety's own documents. Read the instruction manual before first use.
DIELECTRIC HARNESS · 310 LBANSI Z359.11-2021 · OSHA 1926.502PART DE-6001
The Super Anchor DE-6001 Dielectric Harness is a full body harness for working near electrical hazards, with a fully insulated rear D-ring and adjustment buckles. Its polymer coated hardware is listed at 13kV resistance. It is rated for fall arrest and fall restraint for workers up to 310 lb and comes in Hi-Viz or Ultra-Viz webbing.
Super Anchor DE-6001 Dielectric Harness key features
How to put on and fit the Super Anchor DE-6001 harness
Per Super Anchor's dielectric harness instruction manual: put on the harness and locate the dorsal D-ring, then slide the webbing through the D-pad slots so the D-ring sits 6 to 12 inches below the shoulders. Connect the chest strap buckle, set its width, and adjust its height so the chest strap sits about 12 inches below the shoulders. Connect the leg straps and tighten them for a snug fit, then adjust overall length with the shoulder strap adjuster buckles. Super Anchor warns that improper adjustment can let a worker fall out of the harness. Inspect before each use and have a competent person inspect it at least once a year.
Super Anchor DE-6001 Dielectric Harness specifications
| Fall protection rating | Fall arrest and fall restraint |
| Dielectric specification | Electrical resistant D-rings and buckles |
| Hardware | ANSI Z359.1-07 polymer coated, 13kV resistance |
| Worker capacity | Up to 310 lb |
| Webbing | 1-3/4" polyester, min. breaking strength 6,000 lb |
| D-ring | 1 rear D-ring, drop forged steel, min. 5,000 lb tensile, proof loaded to 3,600 lb |
| Buckles/adjusters | Chest/leg strap pass-thru; shoulder strap friction buckles; coated steel, min. 4,000 lb breaking strength |
| Harness stretch | 12" maximum with proper adjustment |
| Warning labels | HD permanent attached and protected warning and inspection labels |
| Webbing options | Hi-Viz, Ultra-Viz |
| Sizes | Small, Medium, Large, X-Large, 2X-Large |
| Standards | ANSI Z359.11-2021 · OSHA 1926.502 |
CERTIFICATION — ANSI Z359.11-2021; OSHA 1926.502 (HARDWARE: ANSI Z359.1-07) · NOT CSA
Super Anchor Safety lists this product to ANSI Z359.11-2021; OSHA 1926.502 (hardware: ANSI Z359.1-07) (US fall protection standards). Its page shows no CSA Z259 mark, so treat it as not CSA certified. If your site or jurisdiction requires CSA-marked equipment, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Super Anchor DE-6001 Dielectric Harness FAQ
What makes the Super Anchor DE-6001 harness dielectric?
The rear D-ring and adjustment buckles are completely insulated. Super Anchor lists the hardware as polymer coated with 13kV resistance, for working near electrical hazards.
What is the weight capacity of the Super Anchor DE-6001?
Super Anchor lists a worker capacity of up to 310 lb.
What is the difference between Hi-Viz and Ultra-Viz DE-6001?
Both are the same DE-6001 dielectric harness. The difference is the webbing: Hi-Viz or Ultra-Viz. Each comes in Small to 2X-Large.
Can the Super Anchor DE-6001 be used for fall arrest?
Yes. Super Anchor rates the DE-6001 for fall arrest and fall restraint, with one rear D-ring rated to a minimum of 5,000 lb.
Is the Super Anchor DE-6001 Dielectric Harness CSA certified?
Super Anchor does not list CSA certification for the DE-6001. It lists ANSI Z359.11-2021 and OSHA 1926.502.