SCROLL
SHINGLE & WOOD ANCHORS · CSA / ANSI / OSHA · RESIDENTIAL
Shingle & Wood Roof Anchors in Canada
Reusable and permanent fall protection anchors for asphalt shingle and wood-deck roofs — the residential re-roof workhorses. From an affordable reusable anchor to permanent stainless D-ring plates, from Frontline, FallTech, Malta Dynamics and Safety Direct. Stocked in Paris, Ontario and priced in CAD — certification stated plainly.
Quick answerFor asphalt shingle or wood-deck roofs, use a reusable or permanent shingle anchor nailed through the deck into a truss or rafter — rated to CSA Z259.15, ANSI Z359.18 or OSHA 1926.502.
- Residential & re-roof
- Reusable & permanent
- CSA / ANSI / OSHA
- Nails into trusses
- Ships from Paris, ON
Shop Shingle & Wood Anchors
LIVE INVENTORY · CAD PRICING · ADD TO CART
Other roof anchor types
MATCH THE ANCHOR TO THE DECK
- METAL
Standing SeamNon-penetrating clamp-on for metal seams.Shop standing seam → - METAL
R-Panel / Screw-DownScrew-down for exposed-fastener metal.Shop R-panel anchors → - COMMERCIAL
ConcreteCast-in & drill-in for concrete decks.Shop concrete anchors → - COMMERCIAL
ParapetCommercial parapet tie-off.Shop parapet anchors → - ALL ANCHORS
All roof anchorsCompare every anchor type on one hub.Roof anchors hub → - DONE-FOR-YOU
Complete kitsPair the anchor with a harness, lanyard or lifeline.Shop kits →
Choosing a shingle anchor
REUSABLE VS PERMANENT
Reusable hinged anchors nail into the trusses or rafters and can be removed and the holes patched after the job; permanent D-ring plates stay on the roof for repeat access on homes you service often.
FASTEN INTO STRUCTURE
A shingle anchor only holds if it's fastened through the deck into solid structure — a truss or rafter — with the specified nails or screws, not into sheathing alone. Always follow the installation instructions.
BRANDS & RATINGS
We stock Frontline, FallTech, Malta Dynamics and Safety Direct shingle and wood anchors; each lists its actual CSA Z259.15, ANSI Z359.18 or OSHA 1926.502 rating, stated plainly.
Shop Shingle & Wood Anchors for Canadian jobsites
A shingle roof anchor is the tie-off point for residential re-roofs and any work on asphalt shingle or wood-deck roofs. Fall Protection Canada stocks reusable hinged anchors that nail into the trusses and remove cleanly, plus permanent stainless D-ring plates for roofs you service regularly — from Frontline, FallTech, Malta Dynamics and Safety Direct, all shipped from Paris, Ontario in CAD.
For metal roofs use a non-penetrating standing seam anchor or a screw-down R-panel anchor; for concrete decks see concrete anchors. A shingle anchor is one part of the fall arrest system — pair it with a harness and a lanyard or SRL, or grab a complete roofing kit. Call 437-475-2066 for a 24-hour quote.
| Roof type | Recommended anchor | Penetrates the roof? |
|---|---|---|
| Standing seam metal | Non-penetrating clamp-on (standing seam) | No — clamps to the seam |
| Exposed-fastener metal (R-panel) | Screw-down R-panel anchor | Yes (sealed) |
| Asphalt shingle / wood | Reusable or permanent shingle anchor | Small holes, patched |
| Concrete deck | Cast-in or drill-in concrete anchor | Drill-in: yes; cast-in: embedded |
Anchor compliance & inspection guides
CSA Z259 · ANSI Z359 · PROVINCIAL OHS
- COMPLIANCE
CSA vs ANSI Fall Protection Standards in Canada: What's Actually Legal by Province
When ANSI-labelled anchors are accepted and when CSA is mandatory — province by province.
- EQUIPMENT
Canadian Fall Protection Equipment Guide 2026
The complete buyer's guide to anchors, harnesses, lanyards, SRLs and kits for Canadian jobsites.
- INSPECTION
How to Inspect Your Fall Protection Equipment: A Canadian Field Guide
Pre-use and periodic inspection steps for anchors, harnesses, lanyards and SRLs.
Anchors ship to every province — compliance guidance for Ontario, Quebec, Alberta, BC, Manitoba, Saskatchewan, Nova Scotia and Newfoundland & Labrador.
Shop Shingle & Wood Anchors — common questions
ANSWERS YOU CAN CITE
01How is a shingle roof anchor installed?
A reusable shingle anchor is nailed through the shingles and deck into a truss or rafter with the manufacturer's specified nails, then slid under the course above to shed water; after the job it's removed and the small holes are patched. Permanent D-ring plates are fastened in place to stay. Always fasten into solid structure, not sheathing alone, and follow the instructions.
02Are reusable shingle anchors safe to reuse?
Yes, as long as the anchor passes a pre-use inspection — check the body, hinge, D-ring and fastener holes for damage or deformation. Remove any anchor from service immediately after it has arrested a fall.
03Will a shingle anchor leave a hole in my roof?
A reusable anchor leaves small fastener holes that are sealed and patched (and hidden under the shingle course) when it's removed. Permanent anchors are designed to stay installed and flashed. Either way, fasten into structure and seal per the instructions.
04Are your shingle anchors CSA-certified?
Each product page states its actual certification — CSA Z259.15, ANSI Z359.18 or OSHA 1926.502. A CSA mark is a CSA certification; an ANSI or OSHA marking alone is not. Because provincial acceptance of ANSI-only gear varies, we state each rating plainly so you can match it to your provincial OHS rules.