SCROLL

STANDING SEAM ANCHORS · ANSI Z359.18 · NON-PENETRATING

Standing Seam Roof Anchors in Canada

Non-penetrating clamp-on anchors for standing seam metal roofs — they grip the vertical seam with set screws, leaving no holes and no leaks, and are fully reusable. Our own SSRA line plus singles, deluxe kits with a torque wrench, and 4- and 8-piece contractor packs. ANSI Z359.18, stocked in Paris, Ontario and priced in CAD — certification stated plainly.

Quick answerFor a standing seam metal roof, use a non-penetrating clamp-on anchor (ANSI Z359.18) — it grips the seam with set screws, leaves no holes, and is fully reusable.
Shop anchors 24-hr quote: 437-475-2066
  • Non-penetrating
  • No holes / no leaks
  • ANSI Z359.18
  • Reusable
  • Ships from Paris, ON

Shop Standing Seam Anchors

LIVE INVENTORY · CAD PRICING · ADD TO CART

Other roof anchor types

MATCH THE ANCHOR TO THE DECK

Choosing a standing seam anchor

NON-PENETRATING CLAMP-ON

Standing seam anchors clamp to the vertical seam with set screws — no fasteners through the roof membrane, so the roof warranty stays intact and there are no leak paths.

MATCH THE SEAM PROFILE

Seam shapes and heights vary. Confirm the anchor fits your seam profile and torque it to spec; our SSRA line suits common residential and commercial standing seam roofs.

SINGLES, KITS & PACKS

Buy a single anchor, a deluxe kit with a torque wrench, or 4- and 8-piece contractor packs for crews. Each product lists its actual ANSI Z359.18 rating.

Shop Standing Seam Anchors for Canadian jobsites

A standing seam roof anchor is the right tie-off for metal roofs with raised vertical seams — it clamps to the seam with set screws and holds without ever penetrating the panel, so there are no holes to seal and no warranty issues. Fall Protection Canada's own SSRA standing seam anchors come as singles, deluxe kits with a torque wrench, and 4- and 8-piece contractor packs, all shipped from Paris, Ontario in CAD.

If your metal roof uses exposed screws instead of raised seams, you need a screw-down R-panel anchor; for shingle and wood decks see our shingle anchors, and for concrete see concrete anchors. The anchor is only part of the system — pair it with a harness and a lanyard or SRL, or grab a complete roofing kit. Questions? Call 437-475-2066.

Which roof anchor for which roof
Roof typeRecommended anchorPenetrates the roof?
Standing seam metalNon-penetrating clamp-on (standing seam)No — clamps to the seam
Exposed-fastener metal (R-panel)Screw-down R-panel anchorYes (sealed)
Asphalt shingle / woodReusable or permanent shingle anchorSmall holes, patched
Concrete deckCast-in or drill-in concrete anchorDrill-in: yes; cast-in: embedded

Anchor compliance & inspection guides

CSA Z259 · ANSI Z359 · PROVINCIAL OHS

  1. COMPLIANCE

    CSA vs ANSI Fall Protection Standards in Canada: What's Actually Legal by Province

    When ANSI-labelled anchors are accepted and when CSA is mandatory — province by province.

  2. EQUIPMENT

    Canadian Fall Protection Equipment Guide 2026

    The complete buyer's guide to anchors, harnesses, lanyards, SRLs and kits for Canadian jobsites.

  3. INSPECTION

    How to Inspect Your Fall Protection Equipment: A Canadian Field Guide

    Pre-use and periodic inspection steps for anchors, harnesses, lanyards and SRLs.

Anchors ship to every province — compliance guidance for Ontario, Quebec, Alberta, BC, Manitoba, Saskatchewan, Nova Scotia and Newfoundland & Labrador.

Shop Standing Seam Anchors — common questions

ANSWERS YOU CAN CITE

01

Will a standing seam anchor damage my metal roof?
No. A standing seam anchor clamps to the seam with set screws and does not penetrate the roof — there are no holes, no fasteners through the membrane and nothing to seal, so the roof warranty stays intact. That non-penetrating design is exactly why it's the standard choice for standing seam metal.
02

Are standing seam anchors reusable?
Yes. They install and remove without leaving holes, so they can be moved and reused across jobs as long as they pass a pre-use inspection. Check the set screws, body and D-ring before every use and remove from service after a fall arrest.
03

Will it fit any standing seam profile?
Most clamp-on anchors fit a range of common seam shapes and heights, but not every profile. Check the product page for the seams it's rated for, and torque the set screws to the manufacturer's spec. If you're unsure of your seam, call us and we'll confirm fit.
04

What standard are standing seam anchors certified to?
Most are certified to ANSI Z359.18 (anchorage connectors). A product carrying a CSA mark is CSA-certified; an ANSI marking alone is not a CSA certification. We state each anchor's actual rating plainly so you can match it to your provincial OHS rules.