Guardian 00715 Snappy roof anchor, single anchor
$282.99
Skip to product information
Guardian 00715 Snappy roof anchor, single anchor
1/2
  • Guardian 00715 Snappy roof anchor, single anchor
  • Guardian 00715 Snappy roof anchor, 24-box
Guardian 00715 Snappy Disposable Roof Anchor, 24-Box | Canada

Guardian 00715 Snappy Disposable Roof Anchor, 24-Box | Canada

$282.99

Guardian 00715-TV Snappy disposable roof anchor, box of 24. Powder-coated steel disposable anchors for wood roofs that bend to fit any roof pitch. Each anchor is a temporary anchorage connector for one installation: nail it in with 8 x 16d nails, work the roof, then dispose of it after removal. Fasteners included; the box weighs 24 lb.

⚠
Compliance in Canada: OSHA / ANSI, not CSAGuardian lists OSHA 1926 Subpart M and OSHA 1910 (no ANSI standard listed) for the 00715-TV. It is not CSA Z259 certified. If your site or province requires CSA-marked fall protection, see our Safety Direct CSA range; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use. Inspect before each use and remove from service after any fall.
Equipment type
Disposable roof anchor
Strength
5,000 lb MBS
Capacity
130-420 lb, 1 user
Box
24 anchors

Guardian 00715 Snappy roof anchor key features

  • Disposable: one installation, then dispose of after removal
  • Powder-coated steel
  • Bends to fit any roof pitch
  • 8 x 16d nails per anchor, all 8 holes used; nails only
  • Fasteners included
  • Wood substrates only, 3 1/2 in combined thickness with a truss or equivalent support
  • Box of 24 anchors (part 00715-TV)

Guardian 00715 Snappy roof anchor specifications

Manufacturer Guardian Fall Protection
Model 00715-TV Snappy Disposable Roof Anchor
Quantity 24 anchors per box
Box weight 24 lb
Material Powder-coated steel
Minimum breaking strength 5,000 lb
Worker capacity 130-420 lb, 1 user
Roof pitch Over a peak 0/12 to 12/12; on a flat surface 0/12 to sheer
Substrate Wood only, 3 1/2 in combined thickness, with truss or equivalent support
Fasteners 8 x 16d nails, included; no other fastener types
Use Single installation; never for horizontal lifelines; install at least 10 ft from gable ends
Standards OSHA 1926 Subpart M, OSHA 1910

Where the 00715 Snappy roof anchor earns its keep

Production roofing

A box of 24 for crews working roof after roof.

Re-roof and tear-off

Single-use anchor, disposed of after removal.

Any pitch

Bends to fit the roof.

Fall restraint

Restraint use on slopes up to 4/12 per Guardian.

Canadian store
Sold by Fall Protection Canada, Paris, Ontario. CAD pricing, no duties, no border surprises, Canada-wide shipping.

00715 Snappy roof anchor questions and CSA status

Is the Guardian 00715 Snappy roof anchor CSA certified?

No. Guardian lists OSHA 1926 Subpart M and OSHA 1910, not CSA Z259. For CSA-marked anchors see our Safety Direct range.

Can the Guardian Snappy anchor be reused?

No. It is a temporary anchorage connector for one installation; dispose of it after removal from its first location.

How is the Guardian 00715 Snappy fastened?

With 8 x 16d nails using all 8 holes, fully embedded in wood. Guardian does not permit fasteners other than nails.

Where should the Guardian Snappy anchor not go?

Not within 10 ft of gable ends, and never on fascias, rake ends, overhangs or spliced sections. Do not side load it or use it with horizontal lifelines.

Pair the 00715 Snappy roof anchor with a full system

Pair the Snappy with a full-body harness and a rope lifeline or SRL for a complete fall arrest system.