Malta Dynamics P-00041-1 MD Post I-Beam Clamp Stanchion for Horizontal Lifelines | Canada
HLL STANCHIONANSI Z359 / OSHA · NOT CSAMODEL P-00041-1
The Malta Dynamics P-00041-1 is the steel I-beam version of the MD Post safety stanchion. It clamps tool-free onto a structural steel I-beam, giving a crew a temporary tie-off point at height before flooring, decking, or permanent fall protection is in place. Each post is sold individually and is the foundation post for a Malta Dynamics temporary horizontal lifeline system.
Malta Dynamics P-00041-1 I-beam clamp HLL stanchion key features
Malta Dynamics P-00041-1 I-beam clamp HLL stanchion specifications
| Model | P-00041-1 |
| Type | I-beam clamp stanchion (MD Post) |
| Installation | Tool-free clamp on structural steel |
| Sold As | Each (single post) |
| Standards | ANSI Z359 / OSHA 1910 and 1926 (per Malta Dynamics) · not CSA Z259 |
| Brand | Malta Dynamics |
CERTIFICATION — ANSI Z359 / OSHA · NOT CSA
Malta Dynamics lists this product as meeting ANSI Z359 and OSHA 1910/1926 requirements. It is not CSA Z259 certified. If your site or jurisdiction requires CSA-marked fall protection, see our Safety Direct collection; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use.
Malta P-00041-1 I-beam clamp HLL stanchion FAQ for Canadian sites
Is the Malta Dynamics P-00041-1 CSA certified for Canadian sites?
No. Malta Dynamics lists the P-00041-1 as meeting ANSI Z359 and OSHA 1910/1926 requirements; it is not CSA Z259 certified. Many Canadian sites accept ANSI/OSHA-rated equipment, but confirm with your site safety officer and provincial OHS authority before use. If your site requires the CSA mark, see our Safety Direct collection.
How often should the Malta Dynamics P-00041-1 be inspected?
Before every use, and formally by a competent person at least once a year. Remove it from service after any fall or if the inspection finds deformation, cuts, corrosion or other damage.