FallTech 7410 Hinged Reusable Wood Roof Anchor | OSHA 1926.502
FallTech 7410 Hinged Reusable Roof Anchor for Wood Decking
Reusable Temporary AnchorThe FallTech 7410 is a hinged reusable roof anchor designed for temporary installation on wood-decked roofs. The hinged design conforms to both flat and sloped roofs up to 12:12 pitch, making it versatile enough for residential framing, re-roofing, and commercial wood-deck applications. Includes 16D nails for ridge or field installation—no specialty fasteners needed.
Overview
The FallTech 7410 Hinged Reusable Roof Anchor provides a temporary fall arrest anchor point on wood roof structures. Two 10" x 3" anchoring plates connect through a central hinge with a 2-1/4" D-ring, allowing the anchor to pivot and sit flush on pitched roofs. Installation is fast: nail through the pre-drilled holes using the included 16D nails into the roof ridge or field decking. When the job is done, remove the nails and take the anchor to the next site. Plated alloy steel construction with a 5,000 lb minimum static strength D-ring meets OSHA 1926.502 requirements.
Key Features
Hinged Design
Central hinge allows the anchor to conform to flat roofs and pitched roofs up to 12:12. Both plates sit flush against the decking regardless of roof angle.
Reusable Construction
Plated alloy steel plates withstand repeated installation and removal cycles. Move the anchor from job to job without replacement—reducing per-job cost.
16D Nail Installation
Installs with standard 16D nails (included). No specialty fasteners, drill bits, or concrete anchoring systems required. Workers can install with a hammer.
5,000 lb D-Ring
Plated alloy steel D-ring rated at 5,000 lb minimum static strength. Connects to lanyards, SRLs, and lifeline systems.
10" x 3" Anchoring Plates
Dual steel plates distribute load across a wide area of roof decking. Sized for standard residential and commercial wood framing.
Ridge or Field Mounting
Install at the roof ridge for overhead tie-off, or in the field for lateral positioning. Versatile mounting options for different roof layouts and work positions.
Technical Specifications
| Product Type | Hinged reusable temporary roof anchor |
| OSHA Compliance | OSHA 1926.502 |
| CSA Status | VERIFY — not explicitly listed on FallTech product page. Confirm with FallTech Canada. |
| User Capacity (ANSI) | 130–310 lbs (59–141 kg) |
| User Capacity (OSHA) | 130–425 lbs (59–193 kg) |
| Material | Plated alloy steel |
| D-Ring | Plated alloy steel; 5,000 lb min. static strength |
| D-Ring Size | 2-1/4" |
| Plate Dimensions | 10" x 3" (each plate) |
| Roof Compatibility | Wood structures — flat and sloped up to 12:12 pitch |
| Installation | 16D nails (included) — ridge or field mounting |
| Reusable | Yes — remove and relocate between jobsites |
Anchor Standards & Compliance
Important: CSA Status Pending Verification
The FallTech 7410 product page lists OSHA 1926.502 compliance. CSA Z259.15 (Anchorage Connectors) certification was not explicitly stated on the manufacturer's page at time of listing. Fall Protection Canada is verifying CSA status with FallTech's Canadian representative. Canadian jobsites require anchor points that meet CSA Z259.15 or are rated by a professional engineer to support the required loads. Contact us for the latest certification status before specifying this anchor for Canadian projects.
Applications
- Residential roof framing and re-roofing
- Commercial wood-deck roofing projects
- Temporary fall protection during roof construction
- Shingle installation and repair work
- Roof maintenance on wood-framed structures
- Multi-site roofing crews needing portable anchor solutions
How to Choose the Right Roof Anchor
The 7410 is a hinged reusable option for wood decking. If you work on standing seam metal roofs, see our SSRA1 Standing Seam Roof Anchor which clamps to seams without penetration. For a clamp-based temporary anchor on any roof type, the Safety Direct MRRA1 offers a different installation approach. For permanent installations, browse our full roof anchor collection.
Compliance & Standards
OSHA: Meets OSHA 1926.502 requirements for anchorage connectors.
CSA: CSA Z259.15 certification status pending verification with FallTech Canada. Contact Fall Protection Canada for current status.
Note: Canadian provincial OHS codes require anchor points to meet CSA Z259.15 or be rated by a professional engineer for fall arrest loads (minimum 22.2 kN / 5,000 lbs per person).
Frequently Asked Questions
Shipping & Availability
The FallTech 7410 ships from Canada to all provinces and territories. Standard shipping timelines apply. Contact Fall Protection Canada for bulk pricing on multi-anchor orders.