Frontline ROCH01 Halo reusable heavy-duty chain anchor
$164.00
Skip to product information
Frontline ROCH01 Halo reusable heavy-duty chain anchor
1/4
  • Frontline ROCH01 Halo reusable heavy-duty chain anchor
  • Frontline ROCH01 Halo reusable heavy-duty chain anchor, maker photo 2
  • Frontline ROCH01 Halo reusable heavy-duty chain anchor, maker photo 3
  • Frontline ROCH01 Halo reusable heavy-duty chain anchor, maker photo 4
Frontline ROCH01 Halo Reusable Heavy-Duty Chain Anchor

Frontline ROCH01 Halo Reusable Heavy-Duty Chain Anchor

$164.00

Frontline ROCH01 Halo reusable anchor. A reusable roof anchor for wood structures. Two steel plates fasten to the roof with lag screws (6 holes) or nails (10 holes), and an integrated O-ring gives one worker a tie-off point. Light, reusable and quick to move between jobs.

⚠
Compliance in Canada: OSHA / ANSI, not CSAFrontline states the ROCH01 meets or exceeds ANSI Z359.18-2017 and applicable OSHA standards. It is not CSA Z259 certified. If your site or province requires CSA-marked fall protection, see our Safety Direct CSA range; otherwise confirm acceptance with your site safety officer and provincial OHS authority (Ontario MLITSD, Alberta OHS, WorkSafeBC, CNESST) before use. Inspect before each use and remove from service after any fall.
Equipment type
Reusable roof anchor
Substrate
Wood structures
Breaking strength
23 kN
Users
1 at a time

Frontline ROCH01 Halo reusable roof anchor key features

  • Fits a variety of wooden rooftop profiles
  • Two steel plates with 6 holes for lag screws and 10 holes for nails
  • Integrated O-ring tie-off point for one user at a time
  • Lightweight, reusable and easy to install on job after job

Frontline ROCH01 Halo anchor specifications and materials

Manufacturer Frontline
Model / SKU ROCH01
Material High-strength alloy steel
Finish Shot blasted, yellow passivation
Breaking strength 23 kN
Weight About 5 lb (2.3 kg)
Fasteners 6 lag-screw holes, 10 nail holes
Users One at a time
Substrate Wood structures
Standards ANSI Z359.18-2017, OSHA (applicable standards)

Where to use the Frontline ROCH01 Halo anchor on wood roofs

Residential re-roofs

Fasten to the wood deck and framing, then move to the next job.

Wood-framed new builds

Tie-off before the roofing goes on.

Shingle crews

One O-ring per worker on wooden roofs.

Repeat jobs

Reusable plates cut per-job anchor cost.

Canadian store
Sold by Fall Protection Canada, Paris, Ontario. CAD pricing, no duties, no border surprises, Canada-wide shipping.

Frontline ROCH01 Halo anchor questions and CSA status

Is the Frontline ROCH01 Halo anchor CSA certified?

No. Frontline rates it to ANSI Z359.18-2017 and OSHA, not CSA Z259. If your site requires CSA-marked anchors, see our Safety Direct range.

What is the breaking strength of the Frontline ROCH01?

Frontline lists a 23 kN breaking strength. The wood structure it is fastened to must also carry the load; follow the installation manual.

What does the Frontline ROCH01 fasten to?

Wood structures. The two steel plates take lag screws (6 holes) or nails (10 holes).

How many workers can tie off to one ROCH01?

One worker at a time, on the integrated O-ring.

Pair the Frontline ROCH01 Halo anchor with a full system

Pair the ROCH01 with a full-body harness and a shock-absorbing lanyard, SRL or vertical lifeline to complete a personal fall arrest system.