Malta Dynamics C1000 Steel Locking Carabiner | Canada
Shock-absorbing • ANSI Z359.13 • OSHA 1910.140 compliant • CANADIAN STOCK
Malta Dynamics C1000 Steel Locking Carabiner
The Malta Dynamics C1000 Steel Locking Carabiner is a lanyard / connector engineered to ANSI Z359 and OSHA 1910.140 standards for Canadian construction, roofing, and industrial contractors. Stocked in Canada to keep the parts shelf full during peak season, this lanyard / connector matches the spec language most Canadian general contractors and JHSC officers expect to see on a worker’s fall protection inspection card. Pair it with an approved anchor and an ANSI-rated harness for a complete jobsite-ready system.
Energy-Absorbing Shock Pack
The integrated tear-out energy absorber limits maximum arrest force to under 1,800 lbs when deployed per the ANSI Z359.13 protocol. That ceiling is what keeps a 6-foot free fall from cascading into a soft-tissue injury. On the Canadian leading edge — typical of low-slope commercial roofing in the GTA and the Calgary metro — the tear-out indicator on the pack gives the inspector an at-a-glance pass/fail without removing the lanyard from service. Once the indicator is exposed, the lanyard is single-use and must be retired.
Hardware That Survives Real Jobsites
Connectors are forged steel with a 5,000-lb minimum gate strength — the threshold OSHA 1910.140(b) requires for any snap hook used in personal fall arrest. Snap hooks include a roll-out-resistant double-locking mechanism so the lanyard cannot detach from the D-ring under twist load. Webbing is rated to a higher tensile strength than the energy absorber, so the failure mode under shock load is predictable — the absorber tears, the webbing holds, and the worker decelerates inside the manufacturer-tested envelope.
Technical Specifications
| Model | C1000 |
| Category | Lanyard / Connector |
| Capacity / Working Load | — (see Malta product page; needs enrichment) |
| Material | — (see Malta product page; needs enrichment) |
| Dimensions | — (see Malta product page; needs enrichment) |
| Weight | — (see Malta product page; needs enrichment) |
| Certifications | ANSI Z359 / OSHA 1910.140 |
| Country of Origin | USA (Malta, Ohio) |
Jobsite-Ready Build
This lanyard / connector is built for the realities of Canadian construction — Ontario O. Reg. 213/91 fall-protection rules, the Alberta OHS Code, WorkSafeBC OHS Reg Part 11, and CNESST Quebec all recognize ANSI Z359-rated equipment when the product is part of a documented site safety plan. Roofing contractors, steel erectors, and industrial maintenance crews use Malta Dynamics gear where the spec is straightforward US fall-protection performance, and the Canadian-stocked supply chain keeps replacement and inspection cycles short.
Canadian Stock = Faster Compliance
Stocked in Canada to eliminate border delays, brokerage fees, and downtime. Most orders ship within 1-2 business days via LTL freight or courier with tracking. Nationwide shipping — Ontario, Alberta, BC, Quebec, and all other provinces.
Build a Complete Fall Protection System
Pair this lanyard / connector with a compatible harness, lanyard, and approved anchor for a code-compliant fall arrest system. Ask a specialist for system configuration support, compatibility verification, or volume PPE pricing for your crew.